SAFETY WARNINGS AND DISCLAIMERS
【PRIMARY RISK NOTICE AND ASSUMPTION OF RESPONSIBILITY】
(IMPORTANT – READ FIRST)
⚠ Before using any WARRIORLAND® product, you must carefully read, fully understand, and agree to all safety warnings, liability disclaimers, and operating instructions contained in this document, as well as all related content published on the official website at:https://warriorland.net/pages/disclaimer
⚠ If you do not agree with any of the terms stated here, do not use this product. You must immediately cease use and return the product. Continued use of the product constitutes your full understanding of and voluntary acceptance of all risks and responsibilities.
⚠ The use of WARRIORLAND products, whether alone or in combination with firearms, involves inherent and unavoidable risks of serious bodily injury or death.
⚠ To the maximum extent permitted by applicable law, all risks, liabilities, and consequences arising from the use of this product shall be borne solely by the end user.
⚠ Carrying, handling, or using a loaded or chambered firearm involves an extremely high level of risk.
⚠ Do not carry a loaded or chambered firearm unless you are fully willing to assume all risks of bodily injury, death, property damage, and legal consequences that may result.
⚠ To the fullest extent permitted by applicable law, WARRIORLAND shall not be liable for any injury or death arising from the use of this product in combination with a loaded firearm.
This document constitutes the safety warnings and liability disclaimers applicable to all persons or entities that use, install, carry, store, or otherwise come into contact with WARRIORLAND products.
Before using any WARRIORLAND product, you must read and understand this document and all associated safety warnings in their entirety. WARRIORLAND products are designed for use with firearms, which are inherently dangerous. Failure to follow safety instructions may result in property damage, serious bodily injury, or death.
By purchasing WARRIORLAND products, you accept full responsibility for ensuring that all necessary precautions are taken when using, wearing, adjusting, or maintaining holsters and any firearm-related carrying accessories, and that you always engage in responsible and safe behavior.
Regardless of how a user acquires WARRIORLAND products—whether by purchase, gift, resale, exchange, or otherwise—all users are required to strictly comply with all provided safety warnings. WARRIORLAND shall not be liable for any incidents resulting from a user’s failure to comply with such warnings.
“WARRIORLAND Products” refer to all products designed, manufactured, sold, authorized, or otherwise provided by WARRIORLAND, including but not limited to holsters, weapon lights, laser devices, magazine carriers, handcuff holders, clips, mounting hardware, fasteners, screws, installation components, badges, and any related carrying or mounting accessories.
All such products are deemed “WARRIORLAND Products” under this document, regardless of whether the WARRIORLAND brand name is physically marked, printed, or displayed, and regardless of whether the products are sold through third-party platforms, distributors, dealers, agents, or partners.
If no printed installation or user instructions are included with the product, users may scan the QR code on the packaging or to access the official WARRIORLAND store, enter the product model number, and review the complete installation and usage instructions on the corresponding product listing page.
If the information cannot be accessed or located, please contact WARRIORLAND using the contact information below.
For any questions regarding installation, use, safety, or the contents of this document, please contact us through the following official channels:
Customer Service Email: info@usawarriorland.com
Official Website: www.warriorland.net
Official Amazon Brand Store: Search for “WARRIORLAND” on Amazon
Service Hours: Monday–Friday, 9:00–18:00 (Beijing Time, excluding public holidays)
These contact methods are provided solely for general product inquiries and support and do not constitute emergency, safety, or medical response channels.
APPLICABLE PARTIES AND RESPONSIBILITIES
1. End Users and Responsibilities
“End User” refers to any individual or entity that acquires WARRIORLAND products by any means, including purchase, gift, resale, exchange, or otherwise, and who installs, uses, carries, stores, or otherwise comes into contact with such products.
The end user is the sole and primary party responsible for the safe use of firearms and WARRIORLAND products. The end user is responsible for understanding and complying with all applicable firearm-related laws, regulations, and regulatory requirements in their jurisdiction and must strictly follow all installation instructions, usage guidelines, and safety warnings provided by WARRIORLAND.
Any risks, accidents, injuries, damages, losses, or legal consequences resulting from improper use, incorrect installation, unauthorized modification, illegal use, inadequate maintenance, failure to follow safety warnings or operating instructions, or failure to exercise reasonable care shall be borne entirely by the end user. WARRIORLAND assumes no liability whatsoever for such outcomes.
The end user acknowledges and agrees that all consequences arising from their selection, installation, use, carrying, storage, or handling of firearms and WARRIORLAND products are their sole responsibility and expressly waives any and all claims, demands, causes of action, or liabilities against WARRIORLAND in connection therewith.
2. Sellers and Distributors
“Sellers” or “Distributors” include, but are not limited to, agents, distributors, wholesalers, retailers, resellers, online sellers, OEM customers, and any individuals or entities involved in the sale of WARRIORLAND products.
Unless expressly authorized in writing by WARRIORLAND, no seller or distributor is authorized to make representations, warranties, guarantees, commitments, or explanations inconsistent with this document. Any risks, damages, losses, disputes, or liabilities arising from statements, demonstrations, promises, misleading advertising, misrepresentations, or improper conduct by sellers or distributors shall be borne solely by such sellers or distributors. WARRIORLAND assumes no responsibility for such actions.
Sellers and distributors likewise assume no responsibility for damages arising from improper use, incorrect installation, unauthorized modification, or failure by end users to follow safety warnings and operating instructions.
3. Manufacturer Liability Scope
To the maximum extent permitted by applicable law, WARRIORLAND assumes no liability for any risks, accidents, damages, losses, or legal consequences arising from improper use, incorrect installation, unauthorized or non-approved modifications, use in combination with third-party products, environmental factors, external impacts, wear and tear, material aging, or use beyond the reasonable service life of the product.
To the maximum extent permitted by law, WARRIORLAND shall not be liable for any indirect, incidental, special, punitive, or consequential damages, including loss of profits.
Any accident, injury, damage, loss, or legal liability resulting from failure by the end user or seller to comply with safety warnings, incorrect installation, illegal use, unauthorized modification, or use contrary to WARRIORLAND instructions or applicable law shall not be borne by the manufacturer.
GENERAL RISK WARNINGS
This product is intended for use with firearms and related equipment and involves inherent risks. Users must fully understand and carefully consider the following general risks during installation, use, carrying, storage, and maintenance:
1. Operational Risks
This product is intended for use with firearms and related equipment, and firearms are inherently dangerous. Any improper operation, accidental trigger engagement, unsafe muzzle direction, failure to clear the chamber, or deviation from firearm safety procedures may result in serious bodily injury, death, or significant property damage.
2. Installation Risks
Incorrect installation, insecure mounting, improper orientation, incorrect torque, or incompatible components may cause loosening, failure, or abnormal performance, resulting in safety hazards.
3. Environmental and External Force Risks
Drops, impacts, vibration, transportation damage, high or low temperatures, moisture, or corrosive environments may compromise product performance or structural integrity.
4. Maintenance and Aging Risks
Long-term use may cause wear, loosening, aging, or degradation. Users must regularly inspect products and replace or discontinue use if abnormalities are detected.
5. Legal and Compliance Risks
Firearm laws and regulations vary by jurisdiction. End users are responsible for understanding and complying with all applicable laws before purchasing, importing, possessing, installing, using, carrying, storing, or reselling this product. Any legal consequences arising from non-compliance shall be borne solely by the responsible party.
6. Magazine Catch Wear Risk
Wear of the magazine catch may cause unintentional magazine release. WARRIORLAND holsters are not designed to prevent magazine wear, and all associated risks are borne by the user.
7. California Proposition 65 Warning
⚠ WARNING: This product may expose you to chemicals including phthalates and other substances used in polymers, dyes, or adhesives that are known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, visit www.P65Warnings.ca.gov.
If you do not agree with this warning, stop using and return the product. Continued use constitutes acknowledgment, acceptance, and assumption of risk, and WARRIORLAND assumes no liability for resulting harm.
PROHIBITED ACTIONS
1. Firearm Modifications
WARRIORLAND products are designed, manufactured, and intended for use only with firearms that remain in their original factory (OEM / factory stock) condition and configuration.
The use of any WARRIORLAND product in combination with a firearm that has been modified, altered, adjusted, replaced, tuned, reconfigured, or deviates in any way from the original manufacturer’s design, specifications, or standard configuration is strictly prohibited.
This includes, but is not limited to, any firearm on which components related to firing, trigger operation, or internal safety mechanisms have been modified, polished, replaced, removed, reduced, altered, or substituted with aftermarket, competition-grade, uncertified, or user-fabricated parts, including but not limited to: the trigger, trigger shoe, trigger pin, firing pin / striker, hammer, connector, recoil spring, firing mechanism components, internal safeties, or any other parts related to ignition, discharge, or safety.
Any non-factory or third-party modification to the firing system, internal safeties, trigger travel, trigger pull weight, or safety mechanisms may render the firearm unsafe and may significantly increase the risk of unintentional or accidental discharge, failure to reset properly, safety malfunction, excessively light or sensitive trigger activation, uncontrolled discharge, or discharge caused by abnormal friction or interference while holstered.
By choosing to use a firearm that has been modified, altered, is not in original factory condition, is not authorized by the original manufacturer, or does not conform to the original design or manufacturing specifications in combination with any WARRIORLAND product, the end user knowingly and voluntarily assumes all risks associated with such use.
2. Holster Modifications
Users are strictly prohibited from drilling, cutting, slotting, enlarging, milling, shaving, thinning, grinding, polishing, heating (including but not limited to the use of heat guns, ovens, open flames, or any other heat sources), stretching, compressing, deforming, or otherwise modifying any WARRIORLAND holster in any manner whatsoever.
The installation or attachment of any non-original, third-party, or unauthorized accessories or components is strictly prohibited, including but not limited to: claws, wings, clips, attachment points, straps, metal parts, brackets, magnetic components, buckles, adjustment devices, or any other aftermarket or non-approved accessories.
The transfer, reuse, or installation of any parts, screws, spacers, clips, pads, mounting hardware, or accessories from any other brand or model of holster onto any WARRIORLAND product is strictly prohibited.
Any modification, heating, machining, reworking, or alteration of the holster shell, structural body, mounting holes, attachment interfaces, or accessory systems is strictly prohibited and constitutes misuse of the product.
Any such prohibited modification, alteration, or unauthorized use may compromise product integrity, retention performance, structural strength, or safety and may result in product failure, injury, death, or property damage.
3. Usage and Environment
It is strictly prohibited to insert or holster any firearm into any type of holster while the firearm is loaded or has a round chambered.
WARRIORLAND products must not be relied upon as the sole or primary safety device to prevent accidental or unintentional discharge of a firearm.
Users must always observe and comply with fundamental firearm safety rules, including but not limited to proper trigger finger discipline and safe muzzle direction at all times.
Prolonged storage or use of any holster in high-temperature, high-humidity, or extreme environmental conditions is strictly prohibited, as such conditions may cause material degradation, deformation, loss of retention, or structural failure.
4. Other Prohibited Actions
Strictly prohibit the use of any WARRIORLAND product without prior training or safety drills.
Strictly prohibit neglecting the fit and compatibility check between the firearm and the holster, and ensure that no foreign objects interfere.
5. Product Modification and Non-Original Use Risk Disclaimer
All WARRIORLAND designs, attachments, accessories, screws, and hardware are engineered exclusively for specific holster models. Cross-model, cross-brand, or cross-structure use, substitution, or modification of any parts or accessories is strictly prohibited.
Use of incompatible components may result in the firearm not being properly secured, fasteners loosening, or holster failure, which may cause the firearm to fall during carry, alter carry angle or load-bearing points, reduce retention, create unpredictable retention behavior, allow contact with the trigger area, shift firearm position during concealed carry, or result in accidental exposure.
These risks apply whether the components are installed on WARRIORLAND products or on products manufactured by other brands, as all such uses involve assembly and compatibility considerations.
After installation, users must contact WARRIORLAND for confirmation to ensure that the installation method and usage condition comply with applicable safety requirements.
No type of holster—including but not limited to Kydex, polymer, leather, nylon, or hybrid materials—can prevent accidental discharge resulting from firearm modification, component wear, damage, aging, or failure; removal, reduction, or alteration of internal safety mechanisms; or improper user handling, such as fingers, clothing, belts, or foreign objects entering the trigger guard during reholstering, or failure to follow basic firearm safety rules.
Holsters are not designed to withstand explosions, discharge forces, or explosive impact pressures. Their primary function is limited to firearm retention, partial coverage, and carry.
WARRIORLAND products do not provide absolute protection against explosion, impact, crushing, puncture, or trigger activation, and do not replace proper safety training, firearm handling practices, or adherence to established firearm safety protocols.
6. Alcohol / Drugs / Fatigue Warning
⚠ Carrying, handling, training with, maintaining, or testing firearms and WARRIORLAND products is strictly prohibited under any of the following conditions:
After consuming alcohol or while any effects of alcohol remain;
While using any medication, substance, or drug that may impair judgment, reaction time, coordination, or cognitive ability;
While experiencing fatigue, emotional instability, mental impairment, stress, or lack of focus.
⚠ Use of firearms or related products under any of the above conditions significantly increases the risk of improper operation, poor judgment, and serious accidents.
All consequences and liabilities arising therefrom shall be borne solely by the user.
Product Use Safety Rules, Training, and Operational Guidelines
1. Firearm Status and Pre-Use Verification
Before using any WARRIORLAND product, the user must verify that the firearm is unloaded and conduct all testing in a safe and controlled environment.
Prior to inserting a firearm into the holster, the user must ensure that the trigger and trigger guard area are completely free of any foreign objects, including but not limited to clothing, drawstrings, belts, cords, or straps, to prevent inadvertent trigger activation.
Special Notice: Holster Compatibility, Re-Holstering, and Operational Risks
The user is solely responsible for determining whether their specific firearm configuration—including mounted lights, lasers, optics, accessories, and overall component combinations—can function safely and reliably within the holster.
If there is any uncertainty, incompatibility, interference, or insufficient retention, the user must immediately discontinue use.
During compatibility testing and routine use, the user must confirm that none of the following components interfere with any part of the holster structure:
Trigger and trigger guard
Slide
Magazine release
Manual or automatic safety mechanisms
Hammer (if applicable)
Re-Holstering Safety Requirements
When re-holstering, the user must ensure that:
The interior of the holster is completely free of foreign objects;
Fingers remain outside of the trigger guard at all times;
The muzzle is always pointed in a safe direction;
No clothing, drawstrings, belts, cords, or any objects are inside or near the trigger guard area.
⚠ Any clothing or foreign object entering the trigger guard area may result in accidental discharge, causing serious injury or death.
2. Proper Wear and Secure Attachment Requirements
Ensure that the product is worn correctly and securely fastened to prevent movement, loosening, or changes in carry angle during activity.
During wear and operation, always keep the muzzle pointed in a safe direction and avoid aiming at any person or valuable property.
3. Draw and Re-Holstering Procedures
When drawing or re-holstering, the trigger finger must remain completely outside the trigger and trigger guard at all times.
During re-holstering, the index finger may be placed along the outside of the trigger guard as a protective measure to help prevent inadvertent trigger contact.
The draw motion should be controlled, smooth, and deliberate, avoiding excessive force, twisting, or improper technique.
4. Training and Testing Requirements
All users—including but not limited to law enforcement, military personnel, security professionals, and civilian users—should receive professional firearm and holster safety training.
Users must be familiar with the firearm’s mechanical design and operating procedures, as well as the proper wear and use of WARRIORLAND products.
Before carrying a loaded firearm or engaging in live carry, users must repeatedly test drawing and re-holstering in a safe environment to ensure smooth and reliable operation.
If any difficulty, binding, abnormal resistance, improper fit, or operational irregularity is observed, discontinue use immediately and contact the manufacturer or an authorized distributor for inspection, adjustment, or
replacement.
5. Periodic Inspection and Maintenance
Regularly inspect the holster’s structure, materials, and hardware components to ensure there is no deformation, cracking, wear, loosening, or material degradation.
Periodically verify proper firearm-to-holster fit to avoid conditions that are too tight or too loose, both of which may compromise safety and functionality.
If any abnormal condition is identified, discontinue use immediately and repair, replace, or otherwise address the issue before further use.
6. Risk Warning for Holster Use During Strenuous Physical Activity
Use of WARRIORLAND products during strenuous physical activity is not recommended, as such use may cause discomfort or bodily injury.
Such activities include, but are not limited to: running, swimming, jumping, aerobic exercise, strength training, combat sports, and extreme sports.
If the holster is equipped with a retention strap, hood, or other securing mechanism, ensure that it remains fully engaged and properly locked at all times.
However, users should be aware that external impact, sudden force, or unexpected loads may still create safety risks, even when such retention devices are engaged.
In the event of a collision, traffic accident, fall, or similar incident, the holster’s retention performance may be compromised, potentially preventing the firearm from being secured as intended.
Accordingly, when carrying in high-risk environments or during vigorous activities, users must exercise heightened caution and situational awareness to help protect personal safety and property.
Strenuous Activity and Trigger Protection Limitation Disclaimer
⚠ Before engaging in any jumping, running, climbing, rolling, falling, crawling, or other strenuous physical activities, the firearm must be removed from the holster and properly secured.
⚠ Failure to comply with this requirement may result in serious bodily injury or death. All associated risks and consequences are assumed solely by the user.
⚠ Trigger Protection Notice:
No light-bearing holster can provide absolute or complete coverage of the trigger guard.
The ultimate responsibility for ensuring that the trigger cannot be accessed under any circumstances rests solely with the user, not with the holster or the manufacturer.
7. Safety Responsibility Awareness
Users must recognize the inherently high-risk nature of firearm handling and bear full responsibility for ensuring safe use.
Never rely solely on a firearm’s mechanical safeties or on the structural design of WARRIORLAND products to prevent accidental discharge. Proper firearm safety practices and disciplined handling are always the primary safeguards.
Understanding, practicing, and maintaining firearm safety, as well as the proper storage and handling of firearms, are personal, non-transferable responsibilities and obligations of the user.
8. Emergency Response and Issue Reporting
If any abnormal condition is detected—including but not limited to laser misalignment, loosened accessories, or difficulty drawing or re-holstering—discontinue use immediately and seek professional assistance.
Users are encouraged to promptly report any issues to help protect their own safety and the safety of others.
Safety Warnings for Children, Minors, and Special Risk Groups
1. Intended Users and High-Risk Groups
All WARRIORLAND products are professional equipment, not toys, and must not be used by or accessible to children or minors under any circumstances.
Products may contain small detachable components, including screws, fasteners, and springs, which present serious risks of choking, ingestion, suffocation, or severe injury.
2. Supervision and Storage Obligations
2.1 Guardian / Caregiver Responsibilities
Users, guardians, and caregivers are responsible for ensuring that WARRIORLAND products and all components are stored at all times in locations inaccessible to children, legally incapacitated adults, or individuals with mental or cognitive impairments.
During installation, maintenance, adjustment, or disassembly, all components must be properly managed to prevent loss or unauthorized access.
Products or components must never be treated as toys, decorations, or used for any purpose other than their intended design.
2.2 Mandatory Safe Storage Requirements
If a firearm is stored in a loaded condition:
Do not store it in drawers, closets, or unsecured furniture. A dedicated firearm safe (gun safe) must be used.
Firearms and WARRIORLAND products:
Must always be stored in a locked environment, ensuring that unauthorized persons—especially the above-mentioned risk groups—cannot access them.
3. Statement Regarding “Removable / Modular Design”
The removable or modular design of WARRIORLAND products is based on legitimate engineering purposes, including firearm compatibility, user adjustment, maintenance, reliability, and product longevity.
Such design does not constitute a defect or unsafe condition.
Any action that exposes removable components to environments accessible to children or supervised individuals constitutes a violation of this safety warning.
4. Intended Use Definition
“Intended Use” means use of the product only when all of the following conditions are met:
The firearm remains 100% factory original, with no modifications, replacements, or third-party alterations;
The WARRIORLAND product is in original factory condition, without any unauthorized modification;
Installation, wear, carry, and use strictly follow all WARRIORLAND warnings and instructions;
The product is used only with firearms and accessories explicitly designated as compatible;
The product is in sound condition, free from damage, deformation, aging, abnormal wear, or functional defects.
5. Use Outside the Intended Scope
Any of the following conditions constitutes use outside the intended scope, and use must be immediately discontinued:
The firearm or any of its safety or firing components has been modified, replaced, or altered from factory configuration;
The holster, clips, screws, or hardware have been modified or fitted with third-party components;
Actual use deviates from these safety warnings or instructions;
Use with firearms, accessories, lights, lasers, or combinations not explicitly listed as compatible;
The product exhibits cracking, deformation, loosening, aging, wear, or abnormal performance;
The user knows or reasonably should know that a safety risk exists but continues to use the product.
6. Liability Limitations and Assumption of Risk
WARRIORLAND is responsible only for reasonable product safety within the defined scope of intended use and assumes no liability for any damage, injury, or legal consequences arising from:
Failure of guardians or caregivers to properly supervise minors, incapacitated adults, or individuals with mental impairments;
Products or components being placed in locations accessible to such individuals;
Ingestion, swallowing, inhalation, contact, or improper handling of any component;
Use of the product as a toy, decoration, or for non-designed purposes;
Any use outside the defined intended scope.
Any continued use, storage, or handling of this product in violation of the above provisions shall be deemed a knowing and voluntary assumption of all associated risks and consequences by the responsible party.
7. Secondary Sale, Resale, and Missing Warning Disclaimer
Due to the complexity of returns, refurbishment, resale, and redistribution within e-commerce environments, WARRIORLAND cannot guarantee the completeness of packaging, documentation, or safety warnings after the product’s initial sale.
If you receive a product without this safety warning or instruction documentation, discontinue use immediately and obtain the complete documentation through official WARRIORLAND channels.
WARRIORLAND assumes no liability for any injury, damage, or legal consequence resulting from missing or disregarded warnings caused by:
Removal, omission, or failure to include warning materials by third-party platforms, distributors, warehouses, or logistics providers;
Products obtained through unauthorized sellers, secondary markets, or resale channels;
Failure by the user to actively obtain, read, or comply with these safety warnings.
Any continued use of the product without complete safety documentation shall be deemed a voluntary assumption of all risks and responsibilities by the user.
Material, Wear, and Environmental Risks
1. Material Characteristics and Risk Overview
The risks described in this section apply to all WARRIORLAND products used to carry, retain, secure, cover, or protect firearms, ammunition, and related equipment, including but not limited to holsters, magazine pouches, handcuff pouches, tool holders, and other accessory products made of leather, nylon, neoprene, or hybrid materials.
Due to differences in physical properties, products made from different materials may experience the following structural changes and potential risks:
(1) Leather Products
Leather is a natural, flexible material that may, over time, undergo softening, moisture absorption, expansion, deformation, collapse, and reduction in retention strength.
Such changes may cause deformation when the product is subjected to pressure, sitting, bending, body compression, or prolonged use, potentially affecting its ability to retain, shield, or isolate the carried item.
When used in products such as holsters that cover the trigger guard area, these changes may allow material to enter the trigger area, creating a hazardous condition.
Users must regularly inspect leather products for hardness, structural integrity, and retention performance. If noticeable softening, deformation, collapse, or reduced retention is observed, discontinue use immediately.
(2) Nylon Textile Products
Nylon is a flexible structural material that may collapse or fold when bent, compressed, during running,
twisting, or body pressure. Under strenuous activity or high-load conditions, nylon products may be
unable to consistently provide stable support or isolation.
When used as holsters or similar carrying products, there is a risk of folding, pressing into, or interfering
with the trigger area.
Do not use nylon-based carrying products during strenuous physical activity, in high-compression
environments, or when the firearm is loaded.
(3) Neoprene Products
Neoprene materials are soft and highly elastic, and may undergo significant deformation when sitting,
bending, side-loading, external compression, or folding.
In such conditions, the product may be unable to maintain its designed shape or intended retention, isolation, or protective function.
When used in holsters or products covering critical operating areas, avoid drawing, re-holstering, or
manipulating the firearm while the product is under body compression.
(4) Hybrid Holsters
Hybrid products are typically constructed from materials with differing rigidity or elasticity (e.g., a Kydex
front shell with a leather or textile backing). Over extended use, such products may experience:
Gradual misalignment, bending, loosening, or material fatigue due to differential stress behavior;
Loosening, wear, or failure of screws, rivets, fasteners, or connection points.
Users must regularly inspect all material components, attachment points, and connection structures to ensure proper alignment, secure fastening, and normal function.
2. Material Aging Risks
All soft or semi-rigid materials—including but not limited to leather, nylon, neoprene, and composite backings—may experience accelerated aging due to prolonged use and environmental exposure.
Common aging accelerators include friction, compression, tension, heat, humidity, sweat, skin oils, firearm
lubricants, cleaning agents, solvents, ultraviolet exposure, and direct sunlight.
Such aging may result in significant reduction in retention strength, material softening, collapse,
delamination, cracking, moisture absorption, deformation, or loss of original shape, potentially allowing the firearm or equipment to shift, wobble, or even disengage from the product.
If any softening, deformation, cracking, loosening, moisture-related expansion, or reduction in retention is
observed, discontinue use immediately.
3. Structural Load and Belt Clip Risks
The belt clip area—where the clip connects to the holster body—is a primary structural load point and is not designed to withstand impact forces, torsional loads, bending forces, or sustained body compression.
When the user leans forward, sits, twists, or applies pressure to the holster, this area may be subjected to concentrated stress, potentially resulting in cracking, deformation, or structural failure.
In addition, internal forces generated by firearm discharge may also cause cracking or damage to the belt
clip area or holster shell.
If any of the above damage or abnormalities are observed, discontinue use immediately to ensure safety.
Hardware, Accessories, and Compatibility Risks
1. Hardware Quality and Use Considerations
Use of replacement parts that are not certified, authorized, or compliant with original factory specifications may result in hardware loosening, breakage, or failure, potentially causing structural damage to the holster
2. or abnormal product function.
2. Accessory Compatibility
Holsters and accessories are strictly designed for specific models and brands.
Cross-model, cross-brand, or cross-structure use, substitution, or transfer of hardware or accessories is
prohibited.
Use of incompatible hardware or accessories may result in insufficient retention, loose installation, firearm
disengagement, holster position shift, and may increase the risk of accidental discharge or unstable carry.
3. Firearm Specification Update Risks
Firearm manufacturers regularly modify product specifications to improve performance or meet market
demands. Such changes may occur multiple times within the same firearm model, resulting in differences in dimensions, geometry, or critical component details.
Accordingly, even minor design changes may significantly affect the fit and safety of a WARRIORLAND
holster.
Users must periodically verify firearm-to-holster compatibility to ensure safe and reliable carry and use.
If the firearm does not fully fit, or if there is any doubt regarding compatibility, discontinue use immediately.
4. Installation Verification and Risk Allocation
Certain WARRIORLAND accessories are designed for cross-brand or cross-model application and may be
installed on WARRIORLAND products or on products manufactured by other brands. Due to substantial
differences in product structures and specifications, installation may be complex and highly susceptible to
installation errors, improper component use, or structural incompatibility.
To ensure product safety performance and compatibility, end users must contact WARRIORLAND promptly after installation for professional confirmation, inspection, or guidance.
Any safety risk, damage, accident, loss, or legal liability arising from installation errors, improper accessory use, or lack of WARRIORLAND verification shall be borne solely by the installer or user, and
WARRIORLAND assumes no responsibility or liability.
Legal Provisions
1. Limitation of Liability
WARRIORLAND shall not be held liable for any damages, injuries, accidents, property loss, or legal
liabilities resulting from the user’s failure to comply with these safety warnings, the instruction manual,
improper use, modifications, misuse, illegal activities, or failure to follow firearm safety rules.
The company shall not be responsible for any indirect, incidental, punitive damages, loss of profits, or data
loss.
For products that have been refunded but not returned, and are disposed of or retained by the customer,
WARRIORLAND shall no longer bear any responsibility for product quality, usage safety, or related legal
liabilities.
Assumption of Risk for Loaded Firearms
The user acknowledges and explicitly understands that:
Firearms and any products used in conjunction with firearms carry inherent risks and may cause serious
personal injury or death even when used correctly, in normal condition, or in compliance with safety rules.
The purchase, possession, carrying, and use of WARRIORLAND products are entirely the user’s
independent decisions based on their own judgment.
To the maximum extent permitted by applicable law, WARRIORLAND shall not be liable for any loss,
injury, or death resulting from, including but not limited to:
Carrying, operating, or using a loaded firearm;
Accidental discharge, negligent discharge, or unintended firing of a firearm inside or outside a holster;
User’s failure to comply with firearm safety rules, operational procedures, or any warnings in this document;
Continued use of the product by the user despite knowledge of the risks.
The user explicitly understands and agrees that the decision to carry a loaded firearm and to continue using
this product is entirely at the user’s discretion, and all consequences are the user’s responsibility.
2. Disclaimer
This document constitutes a disclaimer and release of liability applicable to all products of the company.
By purchasing, possessing, or continuing to use this product, you acknowledge that:
You have read, understood, and fully accept all terms of this disclaimer;
You are aware that the terms herein may cause you to waive certain important rights, including but not
limited to certain claims against this product;
You voluntarily agree to be bound by all terms of this document without any coercion;
You voluntarily assume all risks associated with firearms and accessories used in conjunction with them,
acknowledging the inherent dangers.
If you do not agree to any terms of this document, you should not purchase, possess, or use this product.
If you have already purchased the product but do not agree to this disclaimer, you should immediately
cease use, return the product, and contact us.
3. Indemnification
When purchasing and/or using any of the company’s products, you agree to defend, indemnify, and hold
harmless the company and all other released parties.
This indemnification applies to all losses or expenses (including but not limited to):
Any loss, damage, liability, or defect, claims, lawsuits, arbitrations, or legal proceedings, judgments, rulings, settlements, fines, penalties, or interest, reasonable attorney fees, litigation costs, enforcement of this
indemnification, and costs of recourse to insurance companies,
provided such items arise from claims made by any third party regarding your purchase, possession,
carrying, or use of this product and are ultimately borne by the company or any released party in a final,
non-appealable judgment.
This indemnification includes, but is not limited to, third-party claims arising from:
Your own negligence, misuse, unlawful carrying, or mishandling of firearms or this product;
General negligence or misconduct of a third party;
Accidents or liabilities arising from your failure to comply with product instructions, warnings, or firearm
safety regulations.
4. Dispute Resolution
To the maximum extent permitted by applicable law, any dispute, claim, or controversy arising out of or
related to the company’s products, their design, functionality, materials, or any terms, statements, obligations,waivers, or breaches herein shall first be resolved through amicable negotiation. If negotiation fails, binding
arbitration shall be used.
Where legally permissible, arbitration shall be conducted under the rules of the American Arbitration
Association or another internationally recognized arbitration institution, with the arbitration venue,
language, and procedures determined by the company in accordance with the law or by mutual agreement.
You hereby acknowledge and agree that, to the maximum extent permitted by law:
You waive the right to have disputes regarding this product or this document resolved by a judge and/or jury;
You shall not participate as a representative or member in any form of class action or class arbitration;
The arbitration award is final, legally binding, and enforceable in any court with jurisdiction.
If any part of this dispute resolution clause is deemed invalid or unenforceable under applicable law, it shall not affect the validity of the remaining clauses; disputes shall then be resolved in accordance with the
applicable law.
5. Governing Law
The interpretation of this safety warning is governed by the mandatory laws applicable at the user’s location or the actual location of product use.
6. Waiver and Limitation of Rights
By purchasing and/or using the company’s holsters, carrying accessories, or any products used in
conjunction with firearms, you explicitly and voluntarily waive, release, and forever discharge the company and its officers, directors, managers, employees, agents, affiliates, members, successors, and assigns
(collectively, the “Released Parties”) from any and all claims, present or future.
Such claims include but are not limited to any personal injury, disability, death, or property damage arising
from or related to:
Your manner of using, wearing, adjusting, or carrying the product;
Any risks occurring during the use of the product in conjunction with a firearm;
Your possession, operation, carrying, or storage of a firearm;
Your failure to comply with the safety warnings, wearing instructions, or operational requirements in the
instruction manual.
You hereby agree:
Not to bring, initiate, or participate in any claims against the company or any Released Party related to the
use of this product;
To permanently and irrevocably release and hold harmless the company and all Released Parties from all
legal liability under any such claims.
7. Transfer of Product
If you transfer, sell, lease, gift, lend, or otherwise provide the company’s holsters, carrying accessories, or any products used in conjunction with firearms, or the firearm used with these products, to another individual
(“Recipient”), you agree and accept the following responsibilities:
You must ensure that the Recipient is fully informed of and accepts all terms, warnings, limitations, risk
assumptions, and releases contained in this document before receiving the product.
If you transfer the product or firearm without ensuring that the Recipient is fully aware and agrees to all
conditions above, you, as the original purchaser, shall bear responsibility for any resulting consequences.
8. Severability
If any provision of this document is found to be invalid, illegal, or unenforceable for any reason, the validity and enforceability of the remaining provisions shall not be affected and shall remain in full force.
Any invalid or unenforceable provision shall, to the maximum extent permitted by law, be deemed modified as necessary and reasonable to render it valid and enforceable; if modification is not possible, it shall be
severed from this document without affecting the remaining provisions.
9. Binding Effect
By purchasing and/or using WARRIORLAND products, you agree that this disclaimer and all its terms are
fully legally binding on you.
This disclaimer is also binding on your immediate family members, personal representatives, heirs,
beneficiaries, and assigns.
You further agree that this disclaimer shall remain in effect and continue to benefit the company, its
successors, assigns, and any Released Parties.
10. Legal Updates
The company reserves the right to update these safety warnings and legal provisions at any time, with updates taking effect upon publication.
Users are advised to review the latest version periodically and rely on the most recent version.
Limited Warranty
WARRIORLAND provides the original purchaser with a 2-year limited warranty from the date of purchase.
This limited warranty applies only under normal and reasonable use, covering defects in materials or
workmanship, and is contingent upon adherence to the user manual, safety warnings, and proper use and
maintenance.
1. Scope of Warranty
Provided that all safety instructions, operational guidelines, and maintenance requirements in this manual
are followed, if a product is confirmed to have a material or manufacturing defect not caused by human factors during the warranty period, WARRIORLAND may, at its sole discretion, provide one of the following
remedies:
Repair the product;
Replace it with the same or equivalent product;
If repair or replacement is not possible, offer a reasonable alternative solution.
2. User Obligations Upon Discovery of a Defect
If any defect potentially affecting safety or normal function is discovered, the user must:
Immediately stop using the product;
Remove the firearm from the holster and store it safely;
Promptly contact WARRIORLAND customer service or official designated channels for resolution.
Continued use of a defective or abnormal product will be deemed as the user assuming all risks and
consequences arising therefrom.
3. Exclusions from Warranty
The following are not covered by this limited warranty, including but not limited to:
Improper use, abuse, misuse, accidents, negligence, or failure to follow the safety warnings and operational
instructions in this manual;
Any unauthorized modification, disassembly, repair, or structural alteration;
Normal wear and tear, including but not limited to scratches, scuffs, surface wear, or color changes;
Damage caused by chemicals, solvents, open flames, extreme temperatures, humid environments, or
improper storage conditions;
Products purchased second-hand;
Products purchased from non-official or unauthorized sales channels;
Products without valid proof of purchase.
4. Warranty Claims Period and Required Documentation
Any warranty claim must be submitted within 60 days of the issue or defect being first discovered and
must include:
Valid proof of purchase (from WARRIORLAND official or authorized retailers);
Necessary product information and a description of the issue.
Late claims or claims with incomplete documentation may be refused at WARRIORLAND’s discretion.
5. Governing Law and Regional Variations
Some jurisdictions may not allow limitations on the duration of implied warranties or the exclusion or
limitation of incidental, consequential, or secondary damages.
In such cases, certain limitations or exclusions in this limited warranty may not apply to you, but this does
not affect the validity of the remaining terms.
6.All rights of interpretation of the above provisions are reserved by WARRIORLAND